Skip to main content
Close
Close
Compatible Materials
Graphite
Graphite
Composites
Composites
Sandwich Material
Sandwich Material
Features
8 Degree Helix Angle (R)
8 Degree Helix Angle (R)
90 Degree Drill Point Angle
90 Degree Drill Point Angle
Air Cooling
Air Cooling
All Lengths
All Lengths
DCC031 Impuls Coating
DCC031 Impuls Coating
DIN 6535 Form HA
DIN 6535 Form HA
HPC
HPC
Karnasch Norm
Karnasch Norm
Micro Grain
Micro Grain
Mill Direction
Mill Direction
Rough Cutting Form
Rough Cutting Form
Side Milling & Grooving
Side Milling & Grooving
Carbide Cutter for CFK/GFK, 8 Milling Blade, 4 Cutting Edges, Drawing Cut
Carbide Cutter for CFK/GFK, 8 Milling Blade, 4 Cutting Edges, Drawing Cut
291762_P
20 IN STOCK
-
+
Carbide Cutter for CFK/GFK, 8 Milling Blade, 4 Cutting Edges, Drawing Cut
Carbide Cutter for CFK/GFK, 8 Milling Blade, 4 Cutting Edges, Drawing Cut
291762_P

Please enter a valid Email AddressPlease enter a valid Email AddressThe Email Address entered is already registered, please sign in with the Email Address or enter a different one

Please enter your name

Please enter your company name

Please select a Country

Please enter a Contact NumberPlease enter a valid Contact Number, the maximum length Is 30 charactersPlease enter a valid Contact Number consisting only Of the following characters & spaces ( ) + 0 1 2 3 4 5 6 7 8 9

Quantity is requiredQuantity too largeQuantity must be an integer numberQuantity must be greater than 0

Date is requiredValid date format is: dd-mm - yyyyDate must not be in the past

Please confirm you are not a robot.
We have been unable to verify your identity, please confirm you are not a robot.

Carbide Cutter for CFK/GFK, 8 Milling Blade, 4 Cutting Edges, Drawing Cut

291762_P
From €156.80 Excl VAT
Loading Variations
-
+
Full carbide roughing and finishing cutter for cfl-gfk, 8 milling blades 4 cutting edges/drawing cut. Rightspiral, rightcutting.

    Product Description

    Full carbide roughing and finishing cutter for CFL-GFK, 8 milling blades 4 cutting edges / drawing cut.

    Rightspiral, rightcutting.

    DCA-031 IMPULS

    For the machining of GRP/CRP/composites and graphite.

    • Coating technology: CVD Chemical Vapour Deposition
    • Micro hardness: 10000 HV0.05
    • Coating material: Diamond
    • Coating thickness: Diameter-related
    • Max. operating temperature: 650 degrees C

    This optimized droplet-free diamond coating increases the tool life of GRP/CRP and graphite machining significantly. As a result of the true contour diamond coating and the 100% control of all drills and cutters, a unique tool life and performance is achieved even with the smallest dimensions.

    Product Downloads

    There are no download types with downloads for this product.

    Related Products

    No related products

    Alternative Products