Skip to main content
Close
Close

End Mills

Karnasch's high speed cutting composite tool range includes solid carbide end mills, CVD end mills, PCD end mills, MKD end mills as well as solid carbide drills, PCD drills, spade drills and PCD saw blades. Our composite tools are suitable for 3D copy milling, contour milling, face and step milling, tapping, drilling, circumference cutting, deburring, slot cutting, countersinking and sawing.

< 1 2 3 4 > 44 Results

Filters
291763_P
Full carbide roughing and finishing cutter for cfl-gfk, 8 milling blades 4 cutting edges/pushing cut. Leftspiral, rightcutting.
From £180.40 Excl VAT
291762_P
Full carbide roughing and finishing cutter for cfl-gfk, 8 milling blades 4 cutting edges/drawing cut. Rightspiral, rightcutting.
From £180.40 Excl VAT
291761_P
Full carbide roughing and finishing cutter for cfl-gfk, 8 milling blades 4 cutting edges/straight teeth. Straight flute.
From £179.12 Excl VAT
291752_P
Full carbide roughing and finishing cutter for cfl-gfk, 8 milling blades/drawing cut.
From £125.38 Excl VAT
291753_P
Full carbide roughing and finishing cutter for cfl-gfk, 8 milling blades/pushing cut.
From £125.38 Excl VAT

Special Offer

290412_P
Diamond-coated solid carbide type "v" mill for burr-free milling of upper and lower edge of fibre-reinforced plastics. Concurrent drawing and pushing blade alignment prevents delamination.
From £92.12 Excl VAT
291771_P
Diamond coated composites cross finish router.
From £166.32 Excl VAT
291751_P
Full carbide roughing and finishing cutter for cfl-gfk, 8 milling blades/straight teeth.
From £125.38 Excl VAT
116001_P
This router is for contouring, grooving, drilling of a wide range of gfk, cfk, fiber glass reinforced plastics as well as mmc (metal matrix composites), mmc.
From £13.04 Excl VAT

Special Offer

290417_P
Diamond-coated solid carbide type "vrk" mill for burr-free milling upper and lower edge if fibre-reinforced plastics with inner cooling. Concurrent drawing and pushing blade alignment prevents delamination.
From £137.41 Excl VAT

Special Offer

306534_P
Pcd- corner radius end mill, positiv, with interior cooling. Pcd = polycriytalline diamond.
From £284.80 Excl VAT

Special Offer

290416_P
Diamond-coated solid carbide type "vr" mill for burr-free milling upper and lower edge if fibre-reinforced plastics without inner cooling. Concurrent drawing and pushing blade alignment prevents delamination.
From £95.19 Excl VAT

< 1 2 3 4 > 44 Results