6 Piece Set, Carbide tipped Annular Cutters, Nitto/Uni Shank, Drill Depth 55mm, Hard Line

CONTENT:

6 carbide tipped annular cutters 201316N

drill depth 55 mm,

Nitto/Universal shank 19mm (3/4)

1 pc each Diameter 12, 14, 16, 18, 22, 26 mm

2 ejectors pin 6,34x102mm, for Diameter12-17mm

2 ejectors pin 7,98x105mm, for Diameter18-26mm

For sets/displays, other content possible.

PROPERTIES:

Available in diameter 12-150 mm. Available in cutting depths 40 mm, 55 mm, 80 mm and 110 mm. Simply the world's largest stock range of carbide tipped annular cutters.

Karnasch carbide tipped annular cutter [Hard-Line] are made with a conical helix for clean chip flow and highest cutting ability even with difficult material.

Karnasch carbide tipped annular cutter [Hard-Line] are exclusively equipped with Sandvik carbide teeth. Our opinion is: only the best carbide is good enough for Karnasch annular cutter.

The Karnasch carbide tipped annular cutter [Hard-Line] are made in an elaborate pre-/intermediate-/after-cutting geometry. This results in: clatter free, silent and easy cutting with highest lifetimes.

USAGE:

Besides maximum cutting capacity in all kind of steels provide only carbide tipped annular cutters:

• Drilling in hardened steel up to 40 Rockwell [HRC] and strength of 1400 N
• Drilling in all sorts of stainless steel
• Drilling in most difficult alloys [Hardox/Inconel/Titan]
• Drilling also excellent in all non-ferrous material such as alu, copper, brass and similar.

NITTO / UNIVERSAL SHANK 19 MM (3/4")

Matching machines made by Nitto:

NITTO KOHKI "ONE TOUCH" TYPE: WOJ 3200 · AO 5575 · WA 3500 · WA 5000 · QA 4000 · QA 6500

Also matching all machines with Weldon shank 19 mm (3/4") (see above). Observe that there is only one clamping face.