- Home
- |
- Products
- |
- Drilling
- |
- Accessories
- |
- Ejector pin 7.98mm x 145mm - Pack of 2
Ejector pin 7.98mm x 145mm - Pack of 2
201403 | 160 IN STOCK
More details on catalogue page number 385 - Click to view
£19.47 Excl VAT (£23.17 incl VAT)
160 IN STOCK
Pack of 2. Price shown is for a pack of 2.
Product Description
Suitable for Adaptor 201386
It is possible to use this one-piece ejector pin in combination with tool holder 201842, 201291, 201843, 201845, 201846. You can drill as deep as 110 mm in one working process without changing. Robust and easy.
Pack of 2
Product Downloads
There are no download types with downloads for this product.
Related Products
201842
With morse taper mt2 with internal cooling for annular cutters with shank universal 19 mm 3/4"/weldon + nitto. Notes, with these tool holders replugging of the 2-pieces ejector pins is not necessary. You can drill as deep as 110 mm in one working process with a 1-part ejector pin.
£156.94 Excl VAT
201291
With morse taper mt3 without internal cooling for annular cutters with shank universal 19 mm 3/4"/weldon + nitto. With these tool holders replugging of the 2-pieces ejector pins is not necessary. You can drill as deep as 110 mm in one working process with a 1-part ejector pin.
£164.54 Excl VAT
201843
With morse taper mt4 with internal cooling for annular cutters with shank universal 19 mm 3/4"/weldon + nitto. With these tool holders replugging of the 2-pieces ejector pins is not necessary. You can drill as deep as 110 mm in one working process with a 1-part ejector pin.
£177.54 Excl VAT
201845
With morse taper mt3 with internal cooling for annular cutters with shank weldon 32 mm 1.1/4". With these tool holders replugging of the 2-pieces ejector pins is not necessary. You can drill as deep as 110 mm in one working process with a 1-part ejector pin.
£171.83 Excl VAT
201846
With morse taper mt4 with internal cooling for annular cutters with shank weldon 32 mm 1.1/4". With these tool holders replugging of the 2-pieces ejector pins is not necessary. You can drill as deep as 110 mm in one working process with a 1-part ejector pin.
£185.05 Excl VAT
201386
Adapter for annular cutters, diameter 61 - 120mm adapter with bore 7,98mm for using weldon shank 32mm (1.1/4) annular cutters on weldon shank 19mm (3/4) machines.
£26.32 Excl VAT
201650_P
Available in diameter 12-150 mm. Available in cutting depths 40 mm, 55 mm, 80 mm and 110 mm. Simply the world's largest stock range of carbide tipped annular cutters. Karnasch carbide tipped annular cutter hard-line are made with a conical helix for clean chip flow and highest cutting ability.
From £78.17 Excl VAT