Carbide Tipped Circular Saw, Dry-Cutter, for Mild Steel, Throw-away

TFPD = Triple-chip / flat tooth thin positive

MACHINE:

• portable machines
• cross-cut saws
• panel and sizing saws
• mitre saws
• table and radial arm saws
• battery-driven saws
• suitable also for so-called DRY-CUTTER machines with reduced speeds such as: JEPSON, RIDGID, ELU, RYOBI.

RECOMMENDED SPEED

For steel, it is beneficial to work at reduced speeds.
Use of cutting spray or Mecut wax increases the service life.

Diameter 160-200 mm = 3500-3000 min-1/rpm
Diameter 210-250 mm = 2800-1900 min-1/rpm
Diameter 260-305 mm = 1800-1500 min-1/rpm
Diameter 350-400 mm = 1500-1000 min-1/rpm

USAGE:

The focus is on cutting profile material and sheet metals up to 6 mm wall thickness. The higher number of teeth is suitable up to 3 mm thickness. For higher service lives.

Blades of the DRY-CUTTER series are often heavily used. A re-sharpening is due to tooth breakage or excessive blunting often no longer possible. Here is our series an alternative as “THROW-AWAY” blades.