Rotary Burr, ZYB, with End Cut, HP7 Cut, Black-Tec Coated
115015_P
More details on catalogue page number 802 - Click to view
From £17.39 Excl VAT (£20.69 incl VAT)
Black-tec coating is specifically designed for non-ferrous materials. Low friction and excellent chip clearance characteristics reduce clogging of the flutes.
Product Description
PRODUCT DETAILS:
HP-7-CUT
BLACK-TEC-coated:
Karnasch BLACK-TEC coating is specifically designed for non-ferrous materials [cut HP-7]. Low friction and excellent chip clearance characteristics reduce clogging of the flutes.
Technical specification:
- For coarse cutting and hightest material removal
- For material, such as:
- Aluminium alloy
- Light metals
- Soft copper and copper alloys [non-ferrous metals]
- Plastics
- Fibre-reinforced plastics [GFK/CFK]
Product Downloads
There are no download types with downloads for this product.
Related Products
115005_P
Black-tec coating is specifically designed for non-ferrous materials. Low friction and excellent chip clearance characteristics reduce clogging of the flutes.
From £16.10 Excl VAT
115025_P
Black-tec coating is specifically designed for non-ferrous materials. Low friction and excellent chip clearance characteristics reduce clogging of the flutes.
From £16.10 Excl VAT
115035_P
Black-tec coating is specifically designed for non-ferrous materials. Low friction and excellent chip clearance characteristics reduce clogging of the flutes.
From £16.10 Excl VAT
115045_P
Black-tec coating is specifically designed for non-ferrous materials. Low friction and excellent chip clearance characteristics reduce clogging of the flutes.
From £16.10 Excl VAT
115055_P
Black-tec coating is specifically designed for non-ferrous materials. Low friction and excellent chip clearance characteristics reduce clogging of the flutes.
From £16.10 Excl VAT
115065_P
Black-tec coating is specifically designed for non-ferrous materials. Low friction and excellent chip clearance characteristics reduce clogging of the flutes.
From £16.10 Excl VAT
115075_P
Black-tec coating is specifically designed for non-ferrous materials. Low friction and excellent chip clearance characteristics reduce clogging of the flutes.
From £34.32 Excl VAT
115085_P
Black-tec coating is specifically designed for non-ferrous materials. Low friction and excellent chip clearance characteristics reduce clogging of the flutes.
From £16.10 Excl VAT
115095_P
Black-tec coating is specifically designed for non-ferrous materials. Low friction and excellent chip clearance characteristics reduce clogging of the flutes.
From £16.10 Excl VAT
Alternative Products
113015_P
For coarse cutting and hightest material removal for material, such as aluminium alloy light metals soft copper and copper alloys non-ferrous metals plastics fibre-reinforced plastics, gfk/cfk, etc.
From £13.35 Excl VAT
113010_P
The most widely used simple cutting style results, high cutting action with good surface finish for use on all ferrous materials such as cast iron, steel less than 60 hrc, stainless steel, inox, nickel basis and titanium alloy, also cooper, brass, bronze.
From £9.34 Excl VAT
113011_P
The most widely used universal cutting style results, high cutting action through cross cutting style smooth operation, short chips for use on all ferrous materials such as cast iron - steel less than 60 hrc stainless steel (inox) nickel basis, etc.
From £9.34 Excl VAT
113012_P
Extra fine cross cutting style excellent control for difficult to reach positions. Smooth operation short chips good surface finish medium cutting action for all kinds of steel, up to extra hard steel,cast iron, stainless steel, inox, etc.
From £5.33 Excl VAT
113013_P
Extremly fine simple cutting style. Excellent surface finish. Preferred for fine deburring all ferrous materials such as up to extra hard steel ca. 70 hrc, cast iron, stainless steel, inox ,heat resistant substances, such as e.g. Nickel based + cobalt.
From £5.33 Excl VAT
113017_P
Extremely robust cross cutting style for super alloys. Impact resistant teeth. Chipping and head breakages are minimised. Excellent control and quiet running. Medium to high cutting action especially for the most difficult super alloys + stainless steel applications.
From £12.01 Excl VAT
114010_P
The most widely used universal cutting style. High quality cutting action through cross cutting style.Smooth operation and short chips. For use on all ferrous materials such as cast iron, steel less than 60 hrc, stainless steel (inox), nickel basis, etc.
From £9.34 Excl VAT
114042_P
Especially designed for steel and cast steel. Extremely high machining output up to 60% higher when compared to conventional cross interlocks. Highly aggressive operation produces large chips with outstanding chip removal.
From £17.36 Excl VAT
114091_P
The revolutionary new universal hp3-pro cutting style. Up to 82% more material removal than our usual hp-3 universal cutting style. Long tool life comes with high performance. Almost vibration-free and controlled work even under tough roughing conditions.
From £16.02 Excl VAT
116091_P
The revolutionary new universal hp3-pro cutting style offers up to 82% more material removal than our usual hp-3 universal cutting style. Almost vibration-free and controlled work even under tough roughing conditions.
From £18.70 Excl VAT