44 Piece Lockable Acrylic Display Case, Carbide tipped Annular Cutters, Weldon Shank, Drill Depth 40mm, Hard Line

CONTENT:

44 carbide tipped annular cutters 201147

drill depth 40 mm,

Weldon shank 19 mm,

2 pc each Diameter 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 30, 32 mm,

1 pc each Diameter 33, 35, 36, 40, 45, 50 mm,

2 ejector pins 6,34x90 mm, for Diameter 12 - 17 mm

4 ejector pins 7,98x90 mm, for Diameter 18 - 50 mm

For sets/displays, other content possible.

PROPERTIES:

Available in diameter 12-150 mm. Available in cutting depths 40 mm, 55 mm, 80 mm and 110 mm. Simply the world's largest stock range of carbide tipped annular cutters.

Karnasch carbide tipped annular cutter [Hard-Line] are made with a conical helix for clean chip flow and highest cutting ability even with difficult material.

Karnasch carbide tipped annular cutter [Hard-Line] are exclusively equipped with Sandvik carbide teeth.

Our opinion is: only the best carbide is good enough for Karnasch annular cutter.

The Karnasch carbide tipped annular cutter [Hard-Line] are made in an elaborate pre-/intermediate-/after-cutting geometry.

This results in: clatter free, silent and easy cutting with highest lifetimes.

USAGE:

Besides maximum cutting capacity in all kind of steels provide only carbide tipped annular cutters:

• Drilling in hardened steel up to 40 Rockwell [HRC] and strength of 1400 N
• Drilling in all sorts of stainless steel
• Drilling in most difficult alloys [Hardox/Inconel/Titan]
• Drilling also excellent in all non-ferrous material such as alu, copper, brass and similar.

WELDON-SHANK 19/32 MM (3/4"+1.1/4")

Matching machines made by:

KARNASCH, ALFRA-ROTABEST, ALFRA ROTAQUICK, BDS, BDS KEYLESS, BEKTOP, BUX, CEMBRE, DUBUIS, ERICO, EUROBOOR, EVOLUTION, HALL (POWERBOR), HOUGEN, JANCY, MAGBROACH, MAGTRON, MAGNETOR, METALLKRAFT, PROMAG, ROTABROACH, RUKO+RUKO EASY LOCK, UNIVERSAL