Allround 60 Eco Carbide Tipped Hole Saw (Complete)

Karnasch hole saws "Allround 60 ECO"-LOW TOOTH for coarse cuts and finishing cuts are a cheap alternative to "POWER-MAX 60 ALLROUND"-HIGH TOOTH.

The "Allround 60 ECO" hole saw allows the processing of all wood materials, plastics, CFK / GRP and even non-ferrous metals such as aluminum, copper and brass.

"Allround 60 ECO" hole saws are available in the diameter range of 19 - 127 mm, with cutting depths of 60 mm.

Handheld machines:

• Maximum recommended Diameter 127mm
• Maximum recommended cutting depth 60mm
• Maximum possible cutting depth 60mm

Stationary and core drilling machines:

• Maximum recommended Diameter 127mm
• Maximum recommended cutting depth 60mm
• Maximum possible cutting depth 60mm

Eco-teeth model:

• For diameter 38-137mm with new arbor for core quick-ejection.
• No operose removal of the core, which is often left in the hole saw.
• Reliable ejection of all cores guaranteed.
• Even wedged cores will be reliable ejected.
• For heavy works we recommend up to 35mm our HEAVY-DUTY arbor art.: 201159 Core will be carried by a spring on the center drill.

The ideal "ALLROUND” hole saw for:

• Electrician
• Carpenters and cabinet makers
• Furniture makers
• Plumbing and heating engineers
• Construction site applications
• Stairway and kitchen studios and similar..
• For drilling almost all materials

USAGE:

At thicker materials in non-ferrous metals over 15 mm it may be necessary (depending on the chip flow) to lift the drill and remove the chips several times.

If drilling maximum cutting depth please remove the ejector spring.

Use only good cutting oil for metals.