DCC-031 Impuls
This optimized droplet-free diamond coating increases the tool life of GRP/CRP and graphite machining significantly. As a result of the true contour diamond coating and the 100% control of all drills and cutters, a unique tool life and performance is achieved even with the smallest dimensions.For the machining of GRP/CRP/composites and graphite.
Coating technology:
- CVD Chemical Vapour Deposition
Micro hardness:
- 10000 HV0.05
Coating material:
- Diamond
Coating thickness:
- Diameter-related
Max. operating temperature:
- 650°C
291763_P
Full carbide roughing and finishing cutter for cfl-gfk, 8 milling blades 4 cutting edges/pushing cut. Leftspiral, rightcutting.
From £211.97 Excl VAT
291762_P
Full carbide roughing and finishing cutter for cfl-gfk, 8 milling blades 4 cutting edges/drawing cut. Rightspiral, rightcutting.
From £211.97 Excl VAT
291761_P
Full carbide roughing and finishing cutter for cfl-gfk, 8 milling blades 4 cutting edges/straight teeth. Straight flute.
From £210.47 Excl VAT
Special Offer
290412_P
Diamond-coated solid carbide type "v" mill for burr-free milling of upper and lower edge of fibre-reinforced plastics. Concurrent drawing and pushing blade alignment prevents delamination.
From £108.25 Excl VAT
Special Offer
290417_P
Diamond-coated solid carbide type "vrk" mill for burr-free milling upper and lower edge if fibre-reinforced plastics with inner cooling. Concurrent drawing and pushing blade alignment prevents delamination.
From £161.46 Excl VAT
Special Offer
290416_P
Diamond-coated solid carbide type "vr" mill for burr-free milling upper and lower edge if fibre-reinforced plastics without inner cooling. Concurrent drawing and pushing blade alignment prevents delamination.
From £111.84 Excl VAT
1 6 Results