- Home
- |
- Products
- |
- Drilling
- |
- Annular Cutters
- |
- Annular Cutters
- |
- Ejector pin 2-parts, 7.98mm x 205mm - Pack of 2
Ejector pin 2-parts, 7.98mm x 205mm - Pack of 2
201152 | 86 IN STOCK
More details on catalogue page number 389 - Click to view
Product Description
Pack of 2
USAGE:
Insert piece (1) into the core drill shank.
Push piece (2) onto part (1). Drill as deep as 50 mm cutting depth. Then remove piece (2) and continue drilling.
Why using 2-parts ejector pins?
Usually, standard Morse taper holders have a cutting depth capacity of 50 mm. If no extra-long holders are used [see art. 201842, 201291, 201843, 201845, 201846], you need for cutting depths above 50 mm 2-part ejector pins.
Product Downloads
There are no download types with downloads for this product.
Related Products
201386
Adapter for annular cutters, diameter 61 - 120mm adapter with bore 7,98mm for using weldon shank 32mm (1.1/4) annular cutters on weldon shank 19mm (3/4) machines.
€19.95 Excl VAT
201842
With morse taper mt2 with internal cooling for annular cutters with shank universal 19 mm 3/4"/weldon + nitto. Notes, with these tool holders replugging of the 2-pieces ejector pins is not necessary. You can drill as deep as 110 mm in one working process with a 1-part ejector pin.
€118.85 Excl VAT
201291
With morse taper mt3 without internal cooling for annular cutters with shank universal 19 mm 3/4"/weldon + nitto. With these tool holders replugging of the 2-pieces ejector pins is not necessary. You can drill as deep as 110 mm in one working process with a 1-part ejector pin.
€124.65 Excl VAT
201843
With morse taper mt4 with internal cooling for annular cutters with shank universal 19 mm 3/4"/weldon + nitto. With these tool holders replugging of the 2-pieces ejector pins is not necessary. You can drill as deep as 110 mm in one working process with a 1-part ejector pin.
€134.45 Excl VAT
201845
With morse taper mt3 with internal cooling for annular cutters with shank weldon 32 mm 1.1/4". With these tool holders replugging of the 2-pieces ejector pins is not necessary. You can drill as deep as 110 mm in one working process with a 1-part ejector pin.
€130.15 Excl VAT
201846
With morse taper mt4 with internal cooling for annular cutters with shank weldon 32 mm 1.1/4". With these tool holders replugging of the 2-pieces ejector pins is not necessary. You can drill as deep as 110 mm in one working process with a 1-part ejector pin.
€140.20 Excl VAT