- Home
- |
- Products
- |
- Drilling
- |
- Annular Cutters
- |
- Annular Cutters
- |
- Ejector pin 2-parts, 7.98mm x 157mm - Pack of 2
Ejector pin 2-parts, 7.98mm x 157mm - Pack of 2
201428 | 54 IN STOCK
More details on catalogue page number 386 - Click to view
Product Description
Pack of 2
USAGE:
Insert piece (1) into the core drill shank.
Push piece (2) onto part (1). Drill as deep as 50 mm cutting depth. Then remove piece (2) and continue drilling.
Why using 2-parts ejector pins?
Usually, standard Morse taper holders have a cutting depth capacity of 50 mm. If no extra-long holders are used [see art. 201842, 201291, 201843, 201845, 201846], you need for cutting depths above 50 mm 2-part ejector pins.
Product Downloads
There are no download types with downloads for this product.
Related Products
201842
With morse taper mt2 with internal cooling for annular cutters with shank universal 19 mm 3/4"/weldon + nitto. Notes, with these tool holders replugging of the 2-pieces ejector pins is not necessary. You can drill as deep as 110 mm in one working process with a 1-part ejector pin.
€118.85 Excl VAT
201291
With morse taper mt3 without internal cooling for annular cutters with shank universal 19 mm 3/4"/weldon + nitto. With these tool holders replugging of the 2-pieces ejector pins is not necessary. You can drill as deep as 110 mm in one working process with a 1-part ejector pin.
€124.65 Excl VAT
201843
With morse taper mt4 with internal cooling for annular cutters with shank universal 19 mm 3/4"/weldon + nitto. With these tool holders replugging of the 2-pieces ejector pins is not necessary. You can drill as deep as 110 mm in one working process with a 1-part ejector pin.
€134.45 Excl VAT
201845
With morse taper mt3 with internal cooling for annular cutters with shank weldon 32 mm 1.1/4". With these tool holders replugging of the 2-pieces ejector pins is not necessary. You can drill as deep as 110 mm in one working process with a 1-part ejector pin.
€130.15 Excl VAT
201846
With morse taper mt4 with internal cooling for annular cutters with shank weldon 32 mm 1.1/4". With these tool holders replugging of the 2-pieces ejector pins is not necessary. You can drill as deep as 110 mm in one working process with a 1-part ejector pin.
€140.20 Excl VAT
201280_P
Annular cutter made of hss-xe special steel + durablue-coating. Besides carbide tipped annular cutters provide coated hss-xe annular cutter the optimal price-performance ratio. Under hard field conditions only in the rarest cases optimum speed and cooling can be considered.
From €49.00 Excl VAT
201280U_P
Annular cutter made of hss-xe special steel + gold-tech surface treatment. Karnasch gold-line annular cutters are the most commonly used non-coated hss-xe annular cutter. Made of high-alloyed hss-xe special steel.
From €58.55 Excl VAT
201660_P
Available in diameter 12-150 mm. Available in cutting depths 40 mm, 55 mm, 80 mm and 110 mm. Simply the world's largest stock range of carbide tipped annular cutters. Karnasch carbide tipped annular cutter hard-line are made with a conical helix for clean chip flow and highest cutting ability.
From €75.45 Excl VAT
210048
Adapter, weldon 32mm, 1 1/4 inch to weldon 19mm, 3/4 inch.
€16.20 Excl VAT
201650_P
Available in diameter 12-150 mm. Available in cutting depths 40 mm, 55 mm, 80 mm and 110 mm. Simply the world's largest stock range of carbide tipped annular cutters. Karnasch carbide tipped annular cutter hard-line are made with a conical helix for clean chip flow and highest cutting ability.
From €59.25 Excl VAT