Skip to main content
Close
Close
Shank POWER-DRILL 4000 with integrated Ejector Spring
Shank POWER-DRILL 4000 with integrated Ejector Spring
201530
11 IN STOCK
1+
€56.10
Total Price €56.10

-
+
Shank POWER-DRILL 4000 with integrated Ejector Spring
Shank POWER-DRILL 4000 with integrated Ejector Spring
201530

Please enter a valid Email AddressPlease enter a valid Email AddressThe Email Address entered is already registered, please sign in with the Email Address or enter a different one

Please enter your name

Please enter your company name

Please select a Country

Please enter a Contact NumberPlease enter a valid Contact Number, the maximum length Is 30 charactersPlease enter a valid Contact Number consisting only Of the following characters & spaces ( ) + 0 1 2 3 4 5 6 7 8 9

Quantity is requiredQuantity too largeQuantity must be an integer numberQuantity must be greater than 0

Date is requiredValid date format is: dd-mm - yyyyDate must not be in the past

Please confirm you are not a robot.
We have been unable to verify your identity, please confirm you are not a robot.

Shank POWER-DRILL 4000 with integrated Ejector Spring

201530 | 11 IN STOCK
€56.10 Excl VAT (RRP €56.10 incl VAT)
11 IN STOCK
-
+
Suitable for hole saws power-max 30. Operating mode, center punch the work piece. Soft materials such as plastics, wood can possibly be done without the center punch. Place the ejector drill 1 in the middle of the center mark. Use little pressure (feed rate.

    Product Description

    Suitable for hole saws POWER-MAX 30.

    OPERATING MODE:

    1. Center punch the work piece. Soft materials such as plastics, wood can possibly be done without the center punch.
    2. Place the ejector drill 1 in the middle of the center mark. Use little pressure (feed rate) until the hole saw reaches a minimum cutting depth of 0,5 mm. The hole saw in self-centered now. Feed rate can be increased.
    3. An ejector spring 2 which is installed in the arbor puts pressure on the ejector drill 1.
    4. The ejector drill 1 ejects the core 4 after drilling process. (If the core will not be ejected, please increase the spring pressure on the ejector drill by turning the Allen screw 3 clockwise).

    ADVANTAGES:

    1. After each drilling process the core will be ejected reliably.
    2. Fits all POWER-MAX hole saw diameters from 14 mm
    3. Since the ejector drill does not drill through the material (as usual with hole saw with center drills), a continuous drilling operation is possible.

    The inevitable "crashing" of the hole saw on the work piece after the break through of the center drill will be avoided (the main reason for tooth fracture at the hole saw).

    Product Downloads

    There are no download types with downloads for this product.

    Related Products

    Alternative Products

    No related products