3 Piece Set, step drills, HSS-XE BLUE-DUR coated, 3 cutting edges
Selected top products at reduced prices
Karnasch BESTSELLER products are selected products with greatly reduced list prices. These products represent some of our most popular products. We're passing on the savings in production costs to our customers. That makes these products exceptional value.
The Karnasch Professional step drill made of HSS-XE steel and TiN-GOLD coating and spiral fluted with split point
Karnasch STEP DRILLS are designed to drill perfectly round holes in sheet metals of an thickness 4 - 5 mm. The transition from one step to the next perfectly deburrs the previously drilled hole. Step drills are therefore a drilling and deburring tool combination.
This versatile tool combines several drills with diameters of 4 - 30 mm. The radius transition simultaneously bezels or deburrs the bore holes.
The drills are axial-radially relief grounded and can be resharpened at the tooth face.
HSS-XE steel + TiN-GOLD coating
Made of high-alloyed special steel XE for considerably longer service life than HSS-Steel. TiN-GOLD coating for a further substantial increase in service life also when machining dry (no/little cooling).
3 step drills HSS-XE + TiN-GOLD coated:
step drills, Diameter 4 - 12 mm
step drills, Diameter 4 - 20 mm
step drills, Diameter 6 - 30 mm
3-Flat shank for:
- Excellent torque transmission
- No slippage in the drill chuck
- This results to superior cutting output
All step drills and sheets drills are available in the patented BLUE-DUR-coating or TiN-GOLD-coating. Coatings significantly increase the service life. Strongly recommended for difficult materials such as stainless steels and if drilling without coolants.
All step drills and sheet drills comes lasered with diameters in the spiral.
All step drills and sheet drills are made of high-alloy steel HSS-XE for a hardness up to 68 HRC. This results in high wear resistance and service life.
Step drills and sheet drills are also available spiral-fluted for:
- Smooth cutting behavior
- No sticking in the material
- Low cutting forces
- Less burrs on the work piece
- Longer service life
For considerably longer tool life in all types of steel for wet and dry machining.
- Coating technology: PVD
- Micro hardness: 2700 HV0.05
- Coating material: TiN
- Coating thickness: Diameter-related
- Max. operating temperature: 600 degrees C
This optimized TiN gold coating provides for a substantial increase of tool life. Due to its high hardness and low coefficient of friction, significant tool life increases are achieved even with dry machining (without/with little cooling).
There are no download types with downloads for this product.