Skip to main content
Close
Close
Compatible Materials
Steel
Steel
Features
Hardcoat
Hardcoat
Karnasch Norm
Karnasch Norm
Micro Grain
Micro Grain
0 Degree Helix Angle (Straight Fluted)
0 Degree Helix Angle (Straight Fluted)
Solid Carbide Jammed Tap Removal Drills
Solid Carbide Jammed Tap Removal Drills
201860_P
48 IN STOCK
-
+
Solid Carbide Jammed Tap Removal Drills
Solid Carbide Jammed Tap Removal Drills
201860_P

Please enter a valid Email AddressPlease enter a valid Email AddressThe Email Address entered is already registered, please sign in with the Email Address or enter a different one

Please enter your name

Please enter your company name

Please select a Country

Please enter a Contact NumberPlease enter a valid Contact Number, the maximum length Is 30 charactersPlease enter a valid Contact Number consisting only Of the following characters & spaces ( ) + 0 1 2 3 4 5 6 7 8 9

Quantity is requiredQuantity too largeQuantity must be an integer numberQuantity must be greater than 0

Date is requiredValid date format is: dd-mm - yyyyDate must not be in the past

Please confirm you are not a robot.
We have been unable to verify your identity, please confirm you are not a robot.

Solid Carbide Jammed Tap Removal Drills

201860_P
From €23.80 Excl VAT
Loading Variations
-
+
Because of hexagonal and cylindrical shank drilling can be performed on nc machines as well as on manual machines with three or four-jaw chucks. 1-5 taps can be remove with one drill to remove jammed taps. Regrinding of drills to remove jammed taps is not economical.

    Product Description

    Because of hexagonal and cylindrical shank drilling can be performed on NC machines as well as on manual machines with three or four-jaw chucks.

    1–5 taps can be remove with one drill to remove jammed taps.

    Regrinding of drills to remove jammed taps is not economical. Due to the hexagon this drill can also be clamped in normal three-orfour-jaw chucks. In case of correct use the core hole will not be damaged in all meterials, also in Cu or AI and hardened materials.

    Cutting data for bench drilling and column drilling machine

    Lubrication: Dry or wet (risk of stick together with lubrication)
    Speed: 100–1500 r/min
    Operation instruction

    1. The workpiece has to be clamped very solid and safe.
    2. The overlapping part on the tap has to be made plane with the workpiece.
    3. Centering of the drill by multiple tip-centering. In case of tip-centering with NC machine please choose a lower cutting speed.
    4. The remove of tap can be made with an NC machine with lubrication (Attention: risk of stick together) also by hand with a bench drilling or column
    5. Remove of remaining chippings with compressed air or with a scriber.
    6. New thread cutting with a new tap.
    7. After finishing the new thread please test the size accuracy.

    Hardcoat Coating

    Ideal for all steels.

    • Coating technology: PVD
    • Micro hardness: 3500 HV0.05
    • Coating material: TiAlN based
    • Coating thickness: Diameter-related
    • Max. operating temperature: 1000 degrees C

    Our special Hardcoat coating achieves excellent results when tapping due to its high hardness and yet elastic layer structure.

    Product Downloads

    There are no download types with downloads for this product.

    Related Products

    No related products

    Alternative Products

    No related products