- Home
- |
- Materials
- |
- Tools For Cast Iron
- |
- 44 Piece Lockable Acrylic Display Case, Carbide tipped Annular Cutters, Weldon Shank, Drill Depth 55mm, Hard Line
44 Piece Lockable Acrylic Display Case, Carbide tipped Annular Cutters, Weldon Shank, Drill Depth 55mm, Hard Line
Product Description
Selected top products at reduced prices
Karnasch BESTSELLER products are selected products with greatly reduced list prices. These products represent some of our most popular products. We're passing on the savings in production costs to our customers. That makes these products exceptional value.
CONTENT:
44 carbide tipped annular cutters 201316
drill depth 55 mm,
Weldon shank 19mm (3/4),
respectively 2: Diameter 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 30, 32 mm
1 pc each Diameter 33, 35, 36, 40, 45, 50 mm
2 ejector pins 6,34x102 mm
4 ejector pins 7,98x105 mm
For sets/displays, other content possible.
PROPERTIES:
Available in diameter 12-150 mm. Available in cutting depths 40 mm, 55 mm, 80 mm and 110 mm. Simply the world's largest stock range of carbide tipped annular cutters.
Karnasch carbide tipped annular cutter [Hard-Line] are made with a conical helix for clean chip flow and highest cutting ability even with difficult material.
Karnasch carbide tipped annular cutter [Hard-Line] are exclusively equipped with Sandvik carbide teeth.
Our opinion is: only the best carbide is good enough for Karnasch annular cutter.
The Karnasch carbide tipped annular cutter [Hard-Line] are made in an elaborate pre-/intermediate-/after-cutting geometry.
This results in: clatter free, silent and easy cutting with highest lifetimes.
USAGE:
Besides maximum cutting capacity in all kind of steels provide only carbide tipped annular cutters:
- Drilling in hardened steel up to 40 Rockwell [HRC] and strength of 1400 N
- Drilling in all sorts of stainless steel
- Drilling in most difficult alloys [Hardox/Inconel/Titan]
- Drilling also excellent in all non-ferrous material such as alu, copper, brass and similar.
WELDON-SHANK 19/32 MM (3/4"+1.1/4")
Matching machines made by:
KARNASCH, ALFRA-ROTABEST, ALFRA ROTAQUICK, BDS, BDS KEYLESS, BEKTOP, BUX, CEMBRE, DUBUIS, ERICO, EUROBOOR, EVOLUTION, HALL (POWERBOR), HOUGEN, JANCY, MAGBROACH, MAGTRON, MAGNETOR, METALLKRAFT, PROMAG, ROTABROACH, RUKO+RUKO EASY LOCK, UNIVERSAL
Product Downloads
There are no download types with downloads for this product.