Carbide Tipped Circular Saw, Dry-Cutter, for Mild Steel, Throw-away

Selected top products at reduced prices

Karnasch BESTSELLER products are selected products with greatly reduced list prices. These products represent some of our most popular products. We're passing on the savings in production costs to our customers. That makes these products exceptional value.

TFPD = Triple-chip / flat tooth thin positive

MACHINE:

• portable machines
• cross-cut saws
• panel and sizing saws
• mitre saws
• table and radial arm saws
• battery-driven saws
• suitable also for so-called DRY-CUTTER machines with reduced speeds such as: JEPSON, RIDGID, ELU, RYOBI.

RECOMMENDED SPEED

For steel, it is beneficial to work at reduced speeds.
Use of cutting spray or Mecut wax increases the service life.

Diameter 160-200 mm = 3500-3000 min-1/rpm
Diameter 210-250 mm = 2800-1900 min-1/rpm
Diameter 260-305 mm = 1800-1500 min-1/rpm
Diameter 350-400 mm = 1500-1000 min-1/rpm

USAGE:

The focus is on cutting profile material and sheet metals up to 6 mm wall thickness. The higher number of teeth is suitable up to 3 mm thickness. For higher service lives.

Blades of the DRY-CUTTER series are often heavily used. A re-sharpening is due to tooth breakage or excessive blunting often no longer possible. Here is our series an alternative as “THROW-AWAY” blades.