Skip to main content
Close
Close

Rough Cutters

Rough milling cutters belong to the group of shank milling cutters and are used in machining processes with high metal removal rates. Due to the deep cutting depths and special roughing teeth, you can achieve high metal removal rates with Karnasch roughing mills.

Perfect results in rough cutting

Rough cutters belong to the group of end mills and are used in machining processes with high cutting volumes. Due to the deep cutting depths and special rough gearing, Karnasch rough cutters achieve high chip removal volumes.

Our range of high performance rough cutters includes solid carbide rough cutters, solid carbide fine rough cutters, solid carbide HXF profile rough cutters, solid carbide extreme rapid rough cutters, solid carbide graphite rough cutters as well as solid carbide rough cutters for GRP/CRP and exotic material. 

The Karnasch rough cutters in premium quality are available in diameters from 3 mm to 20 mm. The solid carbide rough cutters are equipped with two to eight cutting edges and are available in various versions for any material.

< 1 2 3 > 31 Results

Filters
306591_P
Roughing end mill <7xd cutting depth , hsc.
From €58.60 Excl VAT
306573_P
Graphite-roughing end mill for large working depths with corner radius.
From €82.05 Excl VAT
306572_P
Graphite-roughing end mill for large working depths with a straight front.
From €82.05 Excl VAT
306592_P
Roughing end mill <7xd cutting depth , hsc.
From €62.85 Excl VAT
306355_P
Solid carbide roughing end mill with hxf profile < 7xd, extra long.
From €91.60 Excl VAT
306353_P
Solid carbide roughing end mill with hxf profil, long.
From €65.00 Excl VAT
306356_P
Solid carbide fine roughing end mill with hr profile, right hand spiral fluted, mtc, progressive.
From €85.20 Excl VAT
291763_P
Full carbide roughing and finishing cutter for cfl-gfk, 8 milling blades 4 cutting edges/pushing cut. Leftspiral, rightcutting.
From €151.25 Excl VAT
116002_P
This router is for contouring, grooving, drilling of a wide range of gfk, cfk, fiber glass reinforced plastics as well as mmc (metal matrix composites), mmc.
From €12.25 Excl VAT
306433_P
Solid carbide, high performance end mill < 60 hrc.
From €66.00 Excl VAT
116003_P
This router is for contouring, grooving, drilling of a wide range of gfk, cfk, fiber glass reinforced plastics as well as mmc (metal matrix composites), mmc.
From €12.35 Excl VAT
306222_P
Solid carbide rouhing end mill, long, hsc/hpc.
From €76.70 Excl VAT

< 1 2 3 > 31 Results