Rotary Burr, SPG, Tree, HP7 Cut, Black-Tec Coated
115065_P
More details on catalogue page number 805 - Click to view
From €15.70 Excl VAT
Black-tec coating is specifically designed for non-ferrous materials. Low friction and excellent chip clearance characteristics reduce clogging of the flutes.
Product Description
PRODUCT DETAILS:
HP-7-CUT
BLACK-TEC-coated:
Karnasch BLACK-TEC coating is specifically designed for non-ferrous materials [cut HP-7]. Low friction and excellent chip clearance characteristics reduce clogging of the flutes.
Technical specification:
- For coarse cutting and hightest material removal
- For material, such as:
- Aluminium alloy
- Light metals
- Soft copper and copper alloys [non-ferrous metals]
- Plastics
- Fibre-reinforced plastics [GFK/CFK]
Product Downloads
There are no download types with downloads for this product.
Related Products
115005_P
Black-tec coating is specifically designed for non-ferrous materials. Low friction and excellent chip clearance characteristics reduce clogging of the flutes.
From €15.70 Excl VAT
115015_P
Black-tec coating is specifically designed for non-ferrous materials. Low friction and excellent chip clearance characteristics reduce clogging of the flutes.
From €16.90 Excl VAT
115025_P
Black-tec coating is specifically designed for non-ferrous materials. Low friction and excellent chip clearance characteristics reduce clogging of the flutes.
From €15.70 Excl VAT
115035_P
Black-tec coating is specifically designed for non-ferrous materials. Low friction and excellent chip clearance characteristics reduce clogging of the flutes.
From €15.70 Excl VAT
115045_P
Black-tec coating is specifically designed for non-ferrous materials. Low friction and excellent chip clearance characteristics reduce clogging of the flutes.
From €15.70 Excl VAT
115055_P
Black-tec coating is specifically designed for non-ferrous materials. Low friction and excellent chip clearance characteristics reduce clogging of the flutes.
From €15.70 Excl VAT
115075_P
Black-tec coating is specifically designed for non-ferrous materials. Low friction and excellent chip clearance characteristics reduce clogging of the flutes.
From €33.80 Excl VAT
115085_P
Black-tec coating is specifically designed for non-ferrous materials. Low friction and excellent chip clearance characteristics reduce clogging of the flutes.
From €15.70 Excl VAT
115095_P
Black-tec coating is specifically designed for non-ferrous materials. Low friction and excellent chip clearance characteristics reduce clogging of the flutes.
From €15.70 Excl VAT
Alternative Products
113065_P
For coarse cutting and the highest removal for materials such as aluminium alloys, light metals, soft copper, copper alloys, non-ferrous metals, plastics, fibre-reinforced plastics and gfk/cfk.
From €11.50 Excl VAT
116096_P
The revolutionary new universal hp3-pro cutting style offers up to 82% more material removal than our usual hp-3 universal cutting style. Almost vibration-free and controlled work even under tough roughing conditions.
From €18.70 Excl VAT
113060_P
The most widely used simple cutting style. High quality cutting action with good surface finish for use on all ferrous materials such as cast iron, steel less than 60 hrc, stainless steel, inox nickel basis and titanium alloy, also cooper, brass, bronze.
From €7.00 Excl VAT
113061_P
The most widely used universal cutting style. High quality cutting action through cross cutting style.Smooth operation and short chips. For use on all ferrous materials such as cast iron, steel less than 60 hrc, stainless steel (inox), nickel basis, etc.
From €7.45 Excl VAT
113062_P
Extra fine cross cutting style excellent control for difficult to reach positions smooth operation short chips good surface finish medium cutting action for all kinds of steel, up to extra hard steel ca. 70 hrc cast iron stainless steel inox, etc.
From €3.95 Excl VAT
113063_P
Extremly fine simple cutting style. Excellent surface finish. Preferred for fine deburring all ferrous materials such as up to extra hard steel ca. 70 hrc, cast iron, stainless steel, inox ,heat resistant substances, such as e.g. Nickel based + cobalt.
From €4.75 Excl VAT
113064_P
Extremly fast metal removal (roughing) for all ferrous material, such as cast iron, steel less than 60 hrc, copper, brass, bronze. Developed for use in tough roughing conditions, such as shipyards or foundries.
From €13.00 Excl VAT
113067_P
Extremely robust cross cutting style for super alloys. Impact resistant teeth. Chipping and head breakages are minimised. Excellent control and quiet running. Medium to high cutting action especially for the most difficult super alloys + stainless steel applications.
From €9.65 Excl VAT
114037_P
Especially designed for stainless steel with an extremely high machining output and service life. Suitable for all ausstenic, rust- and acid-resilient steels. High quality surface finish. No annealing colours at the workpiece due to low heat development.
From €17.85 Excl VAT
114047_P
Especially designed for steel and cast steel. Extremely high machining output up to 60% higher when compared to conventional cross interlocks. Highly aggressive operation produces large chips with outstanding chip removal.
From €16.40 Excl VAT