Skip to main content
Close
Close

Tools For Composites

Karnasch has developed an individual range of tools for any challenges of composites machining. In addition to solid carbide end mills, solid carbide drills, solid carbide taps, whirling thread cutters, solid carbide thread mills and solid carbide deburrers, our microtools are also available for processing up to the very finest detail.

< 1 2 3 4 ... 15 > 176 Results

Filters
116001_P
This router is for contouring, grooving, drilling of a wide range of gfk, cfk, fiber glass reinforced plastics as well as mmc (metal matrix composites), mmc.
From €11.75 Excl VAT
116002_P
This router is for contouring, grooving, drilling of a wide range of gfk, cfk, fiber glass reinforced plastics as well as mmc (metal matrix composites), mmc.
From €12.25 Excl VAT
116003_P
This router is for contouring, grooving, drilling of a wide range of gfk, cfk, fiber glass reinforced plastics as well as mmc (metal matrix composites), mmc.
From €12.35 Excl VAT
116004_P
This router is for contouring, grooving, drilling of a wide range of gfk, cfk, fiber glass reinforced plastics as well as mmc (metal matrix composites), mmc.
From €13.10 Excl VAT

Sale Article

290100_P
Combination milling cutter with drill bit for composites usage,the work temperature must not exceed 60 degrees celsius in order to avoid the resin melting.
From €66.00 Excl VAT

Sale Article

290412_P
Diamond-coated solid carbide type "v" mill for burr-free milling of upper and lower edge of fibre-reinforced plastics. Concurrent drawing and pushing blade alignment prevents delamination.
From €76.80 Excl VAT

Sale Article

290416_P
Diamond-coated solid carbide type "vr" mill for burr-free milling upper and lower edge if fibre-reinforced plastics without inner cooling. Concurrent drawing and pushing blade alignment prevents delamination.
From €92.40 Excl VAT

Sale Article

290417_P
Diamond-coated solid carbide type "vrk" mill for burr-free milling upper and lower edge if fibre-reinforced plastics with inner cooling. Concurrent drawing and pushing blade alignment prevents delamination.
From €107.40 Excl VAT
291751_P
Full carbide roughing and finishing cutter for cfl-gfk, 8 milling blades/straight teeth.
From €105.45 Excl VAT
291752_P
Full carbide roughing and finishing cutter for cfl-gfk, 8 milling blades/drawing cut.
From €105.45 Excl VAT
291753_P
Full carbide roughing and finishing cutter for cfl-gfk, 8 milling blades/pushing cut.
From €105.45 Excl VAT
291761_P
Full carbide roughing and finishing cutter for cfl-gfk, 8 milling blades 4 cutting edges/straight teeth. Straight flute.
From €151.25 Excl VAT

< 1 2 3 4 ... 15 > 176 Results