Skip to main content
Close
Close

Tools For Hardox

Karnasch has developed an individual range of tools for any challenges of hardox machining. In addition to solid carbide end mills, solid carbide drills, solid carbide taps, whirling thread cutters, solid carbide thread mills and solid carbide deburrers, our microtools are also available for processing up to the very finest detail.

< 1 2 3 > 30 Results

Filters
201680_P
The carbide tipped annular cutter with specially developed carbide as well as optimized geometry results in excellent performance for drilling. Karnasch hardox-line annular cutters are made with a conical helix for clean chip flow and highest cutting ability. Karnasch hardox-line annular cutters com.
From €51.55 Excl VAT
201690_P
The carbide tipped annular cutter with specially developed carbide as well as optimized geometry results in excellent performance for drilling. Karnasch hardox-line annular cutters are made with a conical helix for clean chip flow and highest cutting ability. Karnasch hardox-line annular cutters com.
From €59.35 Excl VAT
201284_P
Annular cutter powder steel + durablue coated. Only coated powder steel annular cutters offer a similar level of performance as carbide tipped annular cutters. Under hard field conditions only in the rarest cases optimum speed and cooling can be considered.
From €51.95 Excl VAT
201317_P
Annular cutter powder steel + durablue coated. Only coated powder steel annular cutters offer a similar level of performance as carbide tipped annular cutters. Under hard field conditions only in the rarest cases optimum speed and cooling can be considered.
From €54.00 Excl VAT
201430_P
Twist drill powder steel + durablue coated. Under hard field conditions only in the rarest cases optimum speed and cooling can be considered.the karnasch durablue coating makes the annular cutter decisively more resistant. This results finally to an extraordinary increase of lifetime.
From €25.45 Excl VAT
201465_P
Twist drill powder steel + durablue coated. Under hard field conditions only in the rarest cases optimum speed and cooling can be considered.the karnasch durablue coating makes the annular cutter decisively more resistant. This results finally to an extraordinary increase of lifetime.
From €86.30 Excl VAT

Sale Article

220409_P
Solid carbide high performance twist drill.
From €28.80 Excl VAT
222010_P
Reduce your drilling cost by using karnasch spade drill spade drill is one of the main interchangeable insert drill from karnasch. It is a highly efficient drilling tool with superior performance, designed to substitute those traditional hole drilling products.
From €26.50 Excl VAT
224010_P
Reduce your drilling cost by using karnasch spade drill spade drill is one of the main interchangeable insert drill from karnasch. It is a highly efficient drilling tool with superior performance, designed to substitute those traditional hole drilling products.
From €31.25 Excl VAT
306264_P
Solid carbide minature ball nose slot mill, 2-30 x diameter cutting depth shank 6mm.
From €22.51 Excl VAT

Sale Article

306265_P
Micro end mill with corner radius, conical neck, 0,4 degrees, 0,9 degrees, 1,4 degrees, 1,9 degrees > 35xd.
From €28.80 Excl VAT

Sale Article

306266_P
Micro end mill, radius cutter, conical neck, 0,4 degrees, 0,9 degrees, 1,4 degrees, 1,9 degrees > 35xd.
From €28.80 Excl VAT

< 1 2 3 > 30 Results