Skip to main content
Close
Close

Tools For Sandwich Materials

Karnasch has developed an individual range of tools for any challenges of sandwich material machining. In addition to solid carbide end mills, solid carbide drills, solid carbide taps, whirling thread cutters, solid carbide thread mills and solid carbide deburrers, our microtools are also available for processing up to the very finest detail.

< 1 2 3 > 30 Results

Filters

Sale Article

290100_P
Combination milling cutter with drill bit for composites usage,the work temperature must not exceed 60 degrees celsius in order to avoid the resin melting.
From €66.00 Excl VAT

Sale Article

290412_P
Diamond-coated solid carbide type "v" mill for burr-free milling of upper and lower edge of fibre-reinforced plastics. Concurrent drawing and pushing blade alignment prevents delamination.
From €76.80 Excl VAT

Sale Article

290416_P
Diamond-coated solid carbide type "vr" mill for burr-free milling upper and lower edge if fibre-reinforced plastics without inner cooling. Concurrent drawing and pushing blade alignment prevents delamination.
From €92.40 Excl VAT

Sale Article

290417_P
Diamond-coated solid carbide type "vrk" mill for burr-free milling upper and lower edge if fibre-reinforced plastics with inner cooling. Concurrent drawing and pushing blade alignment prevents delamination.
From €107.40 Excl VAT
291751_P
Full carbide roughing and finishing cutter for cfl-gfk, 8 milling blades/straight teeth.
From €105.45 Excl VAT
291752_P
Full carbide roughing and finishing cutter for cfl-gfk, 8 milling blades/drawing cut.
From €105.45 Excl VAT
291753_P
Full carbide roughing and finishing cutter for cfl-gfk, 8 milling blades/pushing cut.
From €105.45 Excl VAT
291761_P
Full carbide roughing and finishing cutter for cfl-gfk, 8 milling blades 4 cutting edges/straight teeth. Straight flute.
From €151.25 Excl VAT
291762_P
Full carbide roughing and finishing cutter for cfl-gfk, 8 milling blades 4 cutting edges/drawing cut. Rightspiral, rightcutting.
From €151.25 Excl VAT
291763_P
Full carbide roughing and finishing cutter for cfl-gfk, 8 milling blades 4 cutting edges/pushing cut. Leftspiral, rightcutting.
From €151.25 Excl VAT

Best Seller

201500_P
The karnasch bi-metal hole saws - offering an wide range of diameter (14 - 305mm). The range comes also with a new "heavy-duty" holder model recommended from diameter 100 mm. Bi-metal hole saws are the ideal all-round hole saws for electricians, plumbers, heating engineers and locksmiths.
From €3.50 Excl VAT

Best Seller

201020_P
With an optimized design specifically for hand drilling machines, karnasch offers carbide tipped hole saws from the "easy-cut" series. The thin cutting width of only 1.8mm enables fast and smooth drilling at low cutting pressure, excellent guidance and control.
From €12.95 Excl VAT

< 1 2 3 > 30 Results