Skip to main content
Close
Close

Deburring Cutters

Deburring cutters / deburrers are used to remove the sharp edge of the material (burrs). Good deburrers are essential to ensure that the machine elements are not impaired during deburring. The Karnasch deburrers are of highest quality and guarantee reliable deburring results. We offer various deburrers with 45 degree, 60 degree and 90 degree, in Karnasch premium quality, in diameter ranges from 0.5 mm to 12 mm.

Best results in deburring

Deburring cutters / deburrers are used to remove the sharp edge of the material (burrs). Good deburrers are essential to ensure that the machine elements are not impaired during deburring. The Karnasch deburrers are of highest quality and guarantee reliable deburring results. We offer various deburrers with 45°, 60° and 90°, in Karnasch premium quality, in diameter ranges from 0.5 mm to 12 mm. 

The Karnasch range of deburrers includes solid carbide deburrers with and without lapped cutting edges, solid carbide forward and backward deburrers, solid carbide forward and backward quadrant deburrers, diamond coated solid carbide deburrers and diamond coated solid carbide forward and backward deburrers.

Our deburrers are ideally suited for materials such as steel, stainless steel, hardened steel, aluminum alloy, brass, bronze, copper, red brass, plastics, gray cast iron, temper cast iron, hard cast iron, graphite and composites.

< 1 > 11 Results

Filters
306493_P
Solid carbide deburr, long, 90 degrees.
From €27.90 Excl VAT
306491_P
Forward-and backward burr remover, extra long 45 degrees.
From €68.05 Excl VAT
306200_P
Solid carbide deburr, long, 90 degrees, lapped flutes.
From €36.75 Excl VAT
306492_P
Solid carbide deburr, long, 60 degrees.
From €27.90 Excl VAT
306495_P
Minaturee micro grain rounding cutter, concave.
From €34.20 Excl VAT
306494_P
Solid carbide corner rounding cutter, concave.
From €74.55 Excl VAT
306539_P
Diamond coated solid carbide deburr, long, 90 degrees.
From €63.15 Excl VAT
306497_P
Countersinker 90 degrees.
From €70.00 Excl VAT
306490_P
Solid carbide forward- and backward quatercicle, profile end mill.
From €173.80 Excl VAT
306540_P
Diamond coated forward and backward burr remover, extra long, 45 degrees.
From €133.85 Excl VAT

Sale Article

306489_P
Solid carbide burr remove forward and backward.
From €45.00 Excl VAT

< 1 > 11 Results